From be56fb6fe35cb16183d3bf4d9ff9b2c0d61c9686 Mon Sep 17 00:00:00 2001 From: Arti Zirk Date: Tue, 14 Apr 2020 17:41:24 +0300 Subject: [PATCH] Update alacritty --- .config/alacritty/alacritty.yml | 676 +++++++++++++++----------------- 1 file changed, 321 insertions(+), 355 deletions(-) diff --git a/.config/alacritty/alacritty.yml b/.config/alacritty/alacritty.yml index 20d7512..cb94107 100644 --- a/.config/alacritty/alacritty.yml +++ b/.config/alacritty/alacritty.yml @@ -3,23 +3,23 @@ # Any items in the `env` entry below will be added as # environment variables. Some entries may override variables # set by alacritty itself. -env: +#env: # TERM variable # # This value is used to set the `$TERM` environment variable for # each instance of Alacritty. If it is not present, alacritty will # check the local terminfo database and use `alacritty` if it is # available, otherwise `xterm-256color` is used. - TERM: xterm-256color + #TERM: alacritty -window: +#window: # Window dimensions (changes require restart) # # Specified in number of columns/lines, not pixels. # If both are `0`, this setting is ignored. - dimensions: - columns: 0 - lines: 0 + #dimensions: + # columns: 0 + # lines: 0 # Window position (changes require restart) # @@ -33,12 +33,12 @@ window: # # Blank space added around the window in pixels. This padding is scaled # by DPI and the specified value is always added at both opposing sides. - padding: - x: 2 - y: 2 + #padding: + # x: 0 + # y: 0 # Spread additional padding evenly around the terminal content. - dynamic_padding: false + #dynamic_padding: false # Window decorations # @@ -49,10 +49,34 @@ window: # Values for `decorations` (macOS only): # - transparent: Title bar, transparent background and title bar buttons # - buttonless: Title bar, transparent background, but no title bar buttons - decorations: full + #decorations: full + + # Startup Mode (changes require restart) + # + # Values for `startup_mode`: + # - Windowed + # - Maximized + # - Fullscreen + # + # Values for `startup_mode` (macOS only): + # - SimpleFullscreen + #startup_mode: Windowed - # When true, alacritty starts maximized. - start_maximized: false + # Window title + #title: Alacritty + + # Window class (Linux/BSD only): + #class: + # Application instance name + #instance: Alacritty + # General application class + #general: Alacritty + + # GTK theme variant (Linux/BSD only) + # + # Override the variant of the GTK theme. Commonly supported values are `dark` and `light`. + # Set this to `None` to use the default theme variant. + #gtk_theme_variant: None scrolling: # Maximum number of lines in the scrollback buffer. @@ -61,30 +85,9 @@ scrolling: # Number of lines the viewport will move for every line scrolled when # scrollback is enabled (history > 0). - multiplier: 10 + #multiplier: 3 - # Faux Scrolling - # - # The `faux_multiplier` setting controls the number of lines the terminal - # should scroll when the alternate screen buffer is active. This is used - # to allow mouse scrolling for applications like `man`. - # - # Specifying `0` will disable faux scrolling. - faux_multiplier: 10 - - # Scroll to the bottom when new text is written to the terminal. - auto_scroll: false - -# Spaces per Tab (changes require restart) -# -# This setting defines the width of a tab in cells. -# -# Some applications, like Emacs, rely on knowing about the width of a tab. -# To prevent unexpected behavior in these applications, it's also required to -# change the `it` value in terminfo when altering this setting. -tabspaces: 8 - -# Font configuration (changes require restart) +# Font configuration font: # Normal (roman) font face normal: @@ -92,50 +95,62 @@ font: # # Default: # - (macOS) Menlo - # - (Linux) monospace + # - (Linux/BSD) monospace # - (Windows) Consolas + #family: monospace family: xos4 Terminus # The `style` can be specified to pick a specific face. #style: Regular # Bold font face - bold: + #bold: # Font family # # If the bold family is not specified, it will fall back to the # value specified for the normal font. - family: xos4 Terminus + #family: monospace # The `style` can be specified to pick a specific face. #style: Bold # Italic font face - italic: + #italic: # Font family # # If the italic family is not specified, it will fall back to the # value specified for the normal font. - family: xos4 Terminus + #family: monospace # The `style` can be specified to pick a specific face. #style: Italic + # Bold italic font face + #bold_italic: + # Font family + # + # If the bold italic family is not specified, it will fall back to the + # value specified for the normal font. + #family: monospace + + # The `style` can be specified to pick a specific face. + #style: Bold Italic + # Point size size: 12.0 # Offset is the extra space around each character. `offset.y` can be thought of # as modifying the line spacing, and `offset.x` as modifying the letter spacing. - offset: - x: 0 - y: 0 + #offset: + # x: 0 + # y: 0 # Glyph offset determines the locations of the glyphs within their cells with # the default being at the bottom. Increasing `x` moves the glyph to the right, # increasing `y` moves the glyph upwards. - glyph_offset: - x: 0 - y: 0 + #glyph_offset: + # x: 0 + # y: 0 # Thin stroke font rendering (macOS only) # @@ -151,84 +166,78 @@ font: # # This is a global setting and will require a log out or restart to take # effect. - use_thin_strokes: true - -# Display the time it takes to redraw each frame. -render_timer: false - -# Keep the log file after quitting Alacritty. -persistent_logging: false + #use_thin_strokes: true # If `true`, bold text is drawn using the bright color variants. -draw_bold_text_with_bright_colors: true +#draw_bold_text_with_bright_colors: false # Colors (Tomorrow Night Bright) -colors: +#colors: # Default colors - primary: - background: '0x000000' - foreground: '0xeaeaea' + #primary: + # background: '#000000' + # foreground: '#eaeaea' # Bright and dim foreground colors # # The dimmed foreground color is calculated automatically if it is not present. # If the bright foreground color is not set, or `draw_bold_text_with_bright_colors` # is `false`, the normal foreground color will be used. - #dim_foreground: '0x9a9a9a' - #bright_foreground: '0xffffff' + #dim_foreground: '#9a9a9a' + #bright_foreground: '#ffffff' # Cursor colors # # Colors which should be used to draw the terminal cursor. If these are unset, # the cursor color will be the inverse of the cell color. #cursor: - # text: '0x000000' - # cursor: '0xffffff' - + # text: '#000000' + # cursor: '#ffffff' + # Selection colors # - # Colors which should be used to draw the selection area. If selection - # background is unset, selection color will be the inverse of the cell colors. + # Colors which should be used to draw the selection area. If selection + # background is unset, selection color will be the inverse of the cell colors. # If only text is unset the cell text color will remain the same. #selection: - # text: '0xeaeaea' - # background: '0x404040' + # text: '#eaeaea' + # background: '#404040' # Normal colors - normal: - black: '0x000000' - red: '0xd54e53' - green: '0xb9ca4a' - yellow: '0xe6c547' - blue: '0x7aa6da' - magenta: '0xc397d8' - cyan: '0x70c0ba' - white: '0xeaeaea' + #normal: + # black: '#000000' + # red: '#d54e53' + # green: '#b9ca4a' + # yellow: '#e6c547' + # blue: '#7aa6da' + # magenta: '#c397d8' + # cyan: '#70c0ba' + # white: '#eaeaea' # Bright colors - bright: - black: '0x666666' - red: '0xff3334' - green: '0x9ec400' - yellow: '0xe7c547' - blue: '0x7aa6da' - magenta: '0xb77ee0' - cyan: '0x54ced6' - white: '0xffffff' + #bright: + # black: '#666666' + # red: '#ff3334' + # green: '#9ec400' + # yellow: '#e7c547' + # blue: '#7aa6da' + # magenta: '#b77ee0' + # cyan: '#54ced6' + # white: '#ffffff' # Dim colors # # If the dim colors are not set, they will be calculated automatically based # on the `normal` colors. #dim: - # black: '0x000000' - # red: '0x8c3336' - # green: '0x7a8530' - # yellow: '0x97822e' - # blue: '0x506d8f' - # magenta: '0x80638e' - # cyan: '0x497e7a' - # white: '0x9a9a9a' + # black: '#000000' + # red: '#8c3336' + # green: '#7a8530' + # yellow: '#97822e' + # blue: '#506d8f' + # magenta: '#80638e' + # cyan: '#497e7a' + # white: '#9a9a9a' # Indexed Colors # @@ -236,9 +245,9 @@ colors: # When these are not set, they're filled with sensible defaults. # # Example: - # `- { index: 16, color: '0xff00ff' }` + # `- { index: 16, color: '#ff00ff' }` # - indexed_colors: [] + #indexed_colors: [] # Visual Bell # @@ -261,48 +270,88 @@ colors: # - Linear # # Specifying a `duration` of `0` will disable the visual bell. -visual_bell: - animation: EaseOutExpo - duration: 0 - color: '0xffffff' +#visual_bell: +# animation: EaseOutExpo +# duration: 0 +# color: '#ffffff' # Background opacity # # Window opacity as a floating point number from `0.0` to `1.0`. # The value `0.0` is completely transparent and `1.0` is opaque. -background_opacity: 1.0 +#background_opacity: 1.0 -# Mouse bindings +#selection: + #semantic_escape_chars: ",│`|:\"' ()[]{}<>\t" + + # When set to `true`, selected text will be copied to the primary clipboard. + #save_to_clipboard: false + +# Allow terminal applications to change Alacritty's window title. +#dynamic_title: true + +#cursor: + # Cursor style + # + # Values for `style`: + # - ▇ Block + # - _ Underline + # - | Beam + #style: Block + + # If this is `true`, the cursor will be rendered as a hollow box when the + # window is not focused. + #unfocused_hollow: true + +# Live config reload (changes require restart) +#live_config_reload: true + +# Shell # -# Available fields: -# - mouse -# - action -# - mods (optional) +# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`. +# Entries in `shell.args` are passed unmodified as arguments to the shell. # -# Values for `mouse`: -# - Middle -# - Left -# - Right -# - Numeric identifier such as `5` +# Default: +# - (macOS) /bin/bash --login +# - (Linux/BSD) user login shell +# - (Windows) powershell +#shell: +# program: /bin/bash +# args: +# - --login + +# Startup directory # -# All available `mods` and `action` values are documented in the key binding -# section. -mouse_bindings: - - { mouse: Middle, action: PasteSelection } +# Directory the shell is started in. If this is unset, or `None`, the working +# directory of the parent process will be used. +#working_directory: None + +# WinPTY backend (Windows only) +# +# Alacritty defaults to using the newer ConPTY backend if it is available, +# since it resolves a lot of bugs and is quite a bit faster. If it is not +# available, the the WinPTY backend will be used instead. +# +# Setting this option to `true` makes Alacritty use the legacy WinPTY backend, +# even if the ConPTY backend is available. +#winpty_backend: false + +# Send ESC (\x1b) before characters when alt is pressed. +#alt_send_esc: true -mouse: +#mouse: # Click settings # # The `double_click` and `triple_click` settings control the time # alacritty should wait for accepting multiple clicks as one double # or triple click. - double_click: { threshold: 300 } - triple_click: { threshold: 300 } + #double_click: { threshold: 300 } + #triple_click: { threshold: 300 } # If this is `true`, the cursor is temporarily hidden when typing. - hide_when_typing: false + #hide_when_typing: false - url: + #url: # URL launcher # # This program is executed when clicking on a text which is recognized as a URL. @@ -312,7 +361,7 @@ mouse: # # Default: # - (macOS) open - # - (Linux) xdg-open + # - (Linux/BSD) xdg-open # - (Windows) explorer #launcher: # program: xdg-open @@ -322,119 +371,74 @@ mouse: # # These are the modifiers that need to be held down for opening URLs when clicking # on them. The available modifiers are documented in the key binding section. - modifiers: None - -selection: - semantic_escape_chars: ",│`|:\"' ()[]{}<>" - - # When set to `true`, selected text will be copied to the primary clipboard. - save_to_clipboard: false - -# Allow terminal applications to change Alacritty's window title. -dynamic_title: true - -cursor: - # Cursor style - # - # Values for `style`: - # - ▇ Block - # - _ Underline - # - | Beam - style: Block - - # If this is `true`, the cursor will be rendered as a hollow box when the - # window is not focused. - unfocused_hollow: true - -# Live config reload (changes require restart) -live_config_reload: true + #modifiers: None -# Shell +# Mouse bindings # -# You can set `shell.program` to the path of your favorite shell, e.g. `/bin/fish`. -# Entries in `shell.args` are passed unmodified as arguments to the shell. +# Mouse bindings are specified as a list of objects, much like the key +# bindings further below. # -# Default: -# - (Linux/macOS) /bin/bash --login -# - (Windows) powershell -#shell: -# program: /bin/bash -# args: -# - --login - -# Windows 10 ConPTY backend (Windows only) +# To trigger mouse bindings when an application running within Alacritty captures the mouse, the +# `Shift` modifier is automatically added as a requirement. # -# This will enable better color support and may resolve other issues, -# however this API and its implementation is still young and so is -# disabled by default, as stability may not be as good as the winpty -# backend. +# Each mouse binding will specify a: # -# Alacritty will fall back to the WinPTY automatically if the ConPTY -# backend cannot be initialized. -enable_experimental_conpty_backend: false - -# Send ESC (\x1b) before characters when alt is pressed. -alt_send_esc: true +# - `mouse`: +# +# - Middle +# - Left +# - Right +# - Numeric identifier such as `5` +# +# - `action` (see key bindings) +# +# And optionally: +# +# - `mods` (see key bindings) +#mouse_bindings: +# - { mouse: Middle, action: PasteSelection } # Key bindings # -# Key bindings are specified as a list of objects. Each binding will specify a -# key and modifiers required to trigger it, terminal modes where the binding is -# applicable, and what should be done when the key binding fires. It can either -# send a byte sequence to the running application (`chars`), execute a -# predefined action (`action`) or fork and execute a specified command plus -# arguments (`command`). -# -# Bindings are always filled by default, but will be replaced when a new binding -# with the same triggers is defined. To unset a default binding, it can be -# mapped to the `None` action. -# -# Example: -# `- { key: V, mods: Control|Shift, action: Paste }` -# -# Available fields: -# - key -# - mods (optional) -# - chars | action | command (exactly one required) -# - mode (optional) -# -# Values for `key`: -# - `A` -> `Z` -# - `F1` -> `F12` -# - `Key1` -> `Key0` -# -# A full list with available key codes can be found here: -# https://docs.rs/glutin/*/glutin/enum.VirtualKeyCode.html#variants -# -# Instead of using the name of the keys, the `key` field also supports using -# the scancode of the desired key. Scancodes have to be specified as a -# decimal number. -# This command will allow you to display the hex scancodes for certain keys: -# `showkey --scancodes` -# -# Values for `mods`: -# - Command -# - Control -# - Super -# - Shift -# - Alt -# -# Multiple `mods` can be combined using `|` like this: `mods: Control|Shift`. -# Whitespace and capitalization is relevant and must match the example. -# -# Values for `chars`: -# The `chars` field writes the specified string to the terminal. This makes -# it possible to pass escape sequences. -# To find escape codes for bindings like `PageUp` ("\x1b[5~"), you can run -# the command `showkey -a` outside of tmux. -# Note that applications use terminfo to map escape sequences back to -# keys. It is therefore required to update the terminfo when -# changing an escape sequence. -# -# Values for `action`: +# Key bindings are specified as a list of objects. For example, this is the +# default paste binding: +# +# `- { key: V, mods: Control|Shift, action: Paste }` +# +# Each key binding will specify a: +# +# - `key`: Identifier of the key pressed +# +# - A-Z +# - F1-F24 +# - Key0-Key9 +# +# A full list with available key codes can be found here: +# https://docs.rs/glutin/*/glutin/event/enum.VirtualKeyCode.html#variants +# +# Instead of using the name of the keys, the `key` field also supports using +# the scancode of the desired key. Scancodes have to be specified as a +# decimal number. This command will allow you to display the hex scancodes +# for certain keys: +# +# `showkey --scancodes`. +# +# Then exactly one of: +# +# - `chars`: Send a byte sequence to the running application +# +# The `chars` field writes the specified string to the terminal. This makes +# it possible to pass escape sequences. To find escape codes for bindings +# like `PageUp` (`"\x1b[5~"`), you can run the command `showkey -a` outside +# of tmux. Note that applications use terminfo to map escape sequences back +# to keys. It is therefore required to update the terminfo when changing an +# escape sequence. +# +# - `action`: Execute a predefined action +# +# - Copy # - Paste # - PasteSelection -# - Copy # - IncreaseFontSize # - DecreaseFontSize # - ResetFontSize @@ -446,25 +450,59 @@ alt_send_esc: true # - ScrollToBottom # - ClearHistory # - Hide +# - Minimize # - Quit -# - ClearLogNotice +# - ToggleFullscreen # - SpawnNewInstance +# - ClearLogNotice +# - ReceiveChar # - None # -# Values for `command`: -# The `command` field must be a map containing a `program` string and -# an `args` array of command line parameter strings. +# (macOS only): +# - ToggleSimpleFullscreen: Enters fullscreen without occupying another space +# +# - `command`: Fork and execute a specified command plus arguments +# +# The `command` field must be a map containing a `program` string and an +# `args` array of command line parameter strings. For example: +# `{ program: "alacritty", args: ["-e", "vttest"] }` +# +# And optionally: +# +# - `mods`: Key modifiers to filter binding actions # -# Example: -# `command: { program: "alacritty", args: ["-e", "vttest"] }` +# - Command +# - Control +# - Option +# - Super +# - Shift +# - Alt # -# Values for `mode`: -# - ~AppCursor -# - AppCursor -# - ~AppKeypad -# - AppKeypad -key_bindings: - # (Windows/Linux only) +# Multiple `mods` can be combined using `|` like this: +# `mods: Control|Shift`. +# Whitespace and capitalization are relevant and must match the example. +# +# - `mode`: Indicate a binding for only specific terminal reported modes +# +# This is mainly used to send applications the correct escape sequences +# when in different modes. +# +# - AppCursor +# - AppKeypad +# - Alt +# +# A `~` operator can be used before a mode to apply the binding whenever +# the mode is *not* active, e.g. `~Alt`. +# +# Bindings are always filled by default, but will be replaced when a new +# binding with the same triggers is defined. To unset a default binding, it can +# be mapped to the `ReceiveChar` action. Alternatively, you can use `None` for +# a no-op if you do not wish to receive input characters for that binding. +# +# If the same trigger is assigned to multiple actions, all of them are executed +# at once. +#key_bindings: + # (Windows, Linux, and BSD only) #- { key: V, mods: Control|Shift, action: Paste } #- { key: C, mods: Control|Shift, action: Copy } #- { key: Insert, mods: Shift, action: PasteSelection } @@ -474,122 +512,50 @@ key_bindings: #- { key: Subtract, mods: Control, action: DecreaseFontSize } #- { key: Minus, mods: Control, action: DecreaseFontSize } + # (Windows only) + #- { key: Return, mods: Alt, action: ToggleFullscreen } + # (macOS only) - #- { key: Key0, mods: Command, action: ResetFontSize } - #- { key: Equals, mods: Command, action: IncreaseFontSize } - #- { key: Add, mods: Command, action: IncreaseFontSize } - #- { key: Minus, mods: Command, action: DecreaseFontSize } - #- { key: K, mods: Command, action: ClearHistory } - #- { key: K, mods: Command, chars: "\x0c" } - #- { key: V, mods: Command, action: Paste } - #- { key: C, mods: Command, action: Copy } - #- { key: H, mods: Command, action: Hide } - #- { key: Q, mods: Command, action: Quit } - #- { key: W, mods: Command, action: Quit } - - - { key: Paste, action: Paste } - - { key: Copy, action: Copy } - - { key: L, mods: Control, action: ClearLogNotice } - - { key: L, mods: Control, chars: "\x0c" } - - { key: Home, mods: Alt, chars: "\x1b[1;3H" } - - { key: Home, chars: "\x1bOH", mode: AppCursor } - - { key: Home, chars: "\x1b[H", mode: ~AppCursor } - - { key: End, mods: Alt, chars: "\x1b[1;3F" } - - { key: End, chars: "\x1bOF", mode: AppCursor } - - { key: End, chars: "\x1b[F", mode: ~AppCursor } - - { key: PageUp, mods: Shift, action: ScrollPageUp, mode: ~Alt } - - { key: PageUp, mods: Shift, chars: "\x1b[5;2~", mode: Alt } - - { key: PageUp, mods: Control, chars: "\x1b[5;5~" } - - { key: PageUp, mods: Alt, chars: "\x1b[5;3~" } - - { key: PageUp, chars: "\x1b[5~" } - - { key: PageDown, mods: Shift, action: ScrollPageDown, mode: ~Alt } - - { key: PageDown, mods: Shift, chars: "\x1b[6;2~", mode: Alt } - - { key: PageDown, mods: Control, chars: "\x1b[6;5~" } - - { key: PageDown, mods: Alt, chars: "\x1b[6;3~" } - - { key: PageDown, chars: "\x1b[6~" } - - { key: Tab, mods: Shift, chars: "\x1b[Z" } - - { key: Back, chars: "\x7f" } - - { key: Back, mods: Alt, chars: "\x1b\x7f" } - - { key: Insert, chars: "\x1b[2~" } - - { key: Delete, chars: "\x1b[3~" } - - { key: Left, mods: Shift, chars: "\x1b[1;2D" } - - { key: Left, mods: Control, chars: "\x1b[1;5D" } - - { key: Left, mods: Alt, chars: "\x1b[1;3D" } - - { key: Left, chars: "\x1b[D", mode: ~AppCursor } - - { key: Left, chars: "\x1bOD", mode: AppCursor } - - { key: Right, mods: Shift, chars: "\x1b[1;2C" } - - { key: Right, mods: Control, chars: "\x1b[1;5C" } - - { key: Right, mods: Alt, chars: "\x1b[1;3C" } - - { key: Right, chars: "\x1b[C", mode: ~AppCursor } - - { key: Right, chars: "\x1bOC", mode: AppCursor } - - { key: Up, mods: Shift, chars: "\x1b[1;2A" } - - { key: Up, mods: Control, chars: "\x1b[1;5A" } - - { key: Up, mods: Alt, chars: "\x1b[1;3A" } - - { key: Up, chars: "\x1b[A", mode: ~AppCursor } - - { key: Up, chars: "\x1bOA", mode: AppCursor } - - { key: Down, mods: Shift, chars: "\x1b[1;2B" } - - { key: Down, mods: Control, chars: "\x1b[1;5B" } - - { key: Down, mods: Alt, chars: "\x1b[1;3B" } - - { key: Down, chars: "\x1b[B", mode: ~AppCursor } - - { key: Down, chars: "\x1bOB", mode: AppCursor } - - { key: F1, chars: "\x1bOP" } - - { key: F2, chars: "\x1bOQ" } - - { key: F3, chars: "\x1bOR" } - - { key: F4, chars: "\x1bOS" } - - { key: F5, chars: "\x1b[15~" } - - { key: F6, chars: "\x1b[17~" } - - { key: F7, chars: "\x1b[18~" } - - { key: F8, chars: "\x1b[19~" } - - { key: F9, chars: "\x1b[20~" } - - { key: F10, chars: "\x1b[21~" } - - { key: F11, chars: "\x1b[23~" } - - { key: F12, chars: "\x1b[24~" } - - { key: F1, mods: Shift, chars: "\x1b[1;2P" } - - { key: F2, mods: Shift, chars: "\x1b[1;2Q" } - - { key: F3, mods: Shift, chars: "\x1b[1;2R" } - - { key: F4, mods: Shift, chars: "\x1b[1;2S" } - - { key: F5, mods: Shift, chars: "\x1b[15;2~" } - - { key: F6, mods: Shift, chars: "\x1b[17;2~" } - - { key: F7, mods: Shift, chars: "\x1b[18;2~" } - - { key: F8, mods: Shift, chars: "\x1b[19;2~" } - - { key: F9, mods: Shift, chars: "\x1b[20;2~" } - - { key: F10, mods: Shift, chars: "\x1b[21;2~" } - - { key: F11, mods: Shift, chars: "\x1b[23;2~" } - - { key: F12, mods: Shift, chars: "\x1b[24;2~" } - - { key: F1, mods: Control, chars: "\x1b[1;5P" } - - { key: F2, mods: Control, chars: "\x1b[1;5Q" } - - { key: F3, mods: Control, chars: "\x1b[1;5R" } - - { key: F4, mods: Control, chars: "\x1b[1;5S" } - - { key: F5, mods: Control, chars: "\x1b[15;5~" } - - { key: F6, mods: Control, chars: "\x1b[17;5~" } - - { key: F7, mods: Control, chars: "\x1b[18;5~" } - - { key: F8, mods: Control, chars: "\x1b[19;5~" } - - { key: F9, mods: Control, chars: "\x1b[20;5~" } - - { key: F10, mods: Control, chars: "\x1b[21;5~" } - - { key: F11, mods: Control, chars: "\x1b[23;5~" } - - { key: F12, mods: Control, chars: "\x1b[24;5~" } - - { key: F1, mods: Alt, chars: "\x1b[1;6P" } - - { key: F2, mods: Alt, chars: "\x1b[1;6Q" } - - { key: F3, mods: Alt, chars: "\x1b[1;6R" } - - { key: F4, mods: Alt, chars: "\x1b[1;6S" } - - { key: F5, mods: Alt, chars: "\x1b[15;6~" } - - { key: F6, mods: Alt, chars: "\x1b[17;6~" } - - { key: F7, mods: Alt, chars: "\x1b[18;6~" } - - { key: F8, mods: Alt, chars: "\x1b[19;6~" } - - { key: F9, mods: Alt, chars: "\x1b[20;6~" } - - { key: F10, mods: Alt, chars: "\x1b[21;6~" } - - { key: F11, mods: Alt, chars: "\x1b[23;6~" } - - { key: F12, mods: Alt, chars: "\x1b[24;6~" } - - { key: F1, mods: Super, chars: "\x1b[1;3P" } - - { key: F2, mods: Super, chars: "\x1b[1;3Q" } - - { key: F3, mods: Super, chars: "\x1b[1;3R" } - - { key: F4, mods: Super, chars: "\x1b[1;3S" } - - { key: F5, mods: Super, chars: "\x1b[15;3~" } - - { key: F6, mods: Super, chars: "\x1b[17;3~" } - - { key: F7, mods: Super, chars: "\x1b[18;3~" } - - { key: F8, mods: Super, chars: "\x1b[19;3~" } - - { key: F9, mods: Super, chars: "\x1b[20;3~" } - - { key: F10, mods: Super, chars: "\x1b[21;3~" } - - { key: F11, mods: Super, chars: "\x1b[23;3~" } - - { key: F12, mods: Super, chars: "\x1b[24;3~" } - - { key: NumpadEnter, chars: "\n" } + #- { key: Key0, mods: Command, action: ResetFontSize } + #- { key: Equals, mods: Command, action: IncreaseFontSize } + #- { key: Add, mods: Command, action: IncreaseFontSize } + #- { key: Minus, mods: Command, action: DecreaseFontSize } + #- { key: K, mods: Command, action: ClearHistory } + #- { key: K, mods: Command, chars: "\x0c" } + #- { key: V, mods: Command, action: Paste } + #- { key: C, mods: Command, action: Copy } + #- { key: H, mods: Command, action: Hide } + #- { key: M, mods: Command, action: Minimize } + #- { key: Q, mods: Command, action: Quit } + #- { key: W, mods: Command, action: Quit } + #- { key: F, mods: Command|Control, action: ToggleFullscreen } + + #- { key: Paste, action: Paste } + #- { key: Copy, action: Copy } + #- { key: L, mods: Control, action: ClearLogNotice } + #- { key: L, mods: Control, chars: "\x0c" } + #- { key: PageUp, mods: Shift, action: ScrollPageUp, mode: ~Alt } + #- { key: PageDown, mods: Shift, action: ScrollPageDown, mode: ~Alt } + #- { key: Home, mods: Shift, action: ScrollToTop, mode: ~Alt } + #- { key: End, mods: Shift, action: ScrollToBottom, mode: ~Alt } + +#debug: + # Display the time it takes to redraw each frame. + #render_timer: false + + # Keep the log file after quitting Alacritty. + #persistent_logging: false + + # Log level + # + # Values for `log_level`: + # - None + # - Error + # - Warn + # - Info + # - Debug + # - Trace + #log_level: Warn + + # Print all received window events. + #print_events: false