Open-source Windows and Office activator featuring HWID, Ohook, KMS38, and Online KMS activation methods, along with advanced troubleshooting.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

1331 lines
50 KiB

@setlocal DisableDelayedExpansion
@echo off
::============================================================================
::
:: This script is a part of 'Microsoft Activation Scripts' (MAS) project.
::
:: Homepage: massgrave.dev
:: Email: windowsaddict@protonmail.com
::
::============================================================================
:: To activate with Downlevel method (default), run the script with /a parameter or change 0 to 1 in below line
set _acti=0
:: To only generate GenuineTicket.xml with Downlevel method (default), run the script with /g parameter or change 0 to 1 in below line
set _gent=0
:: To enable LockBox method, run the script with /k parameter or change 0 to 1 in below line
:: You need to use this option with either activation or ticket generation.
:: Example,
:: HWID_Activation.cmd /a /k
:: HWID_Activation.cmd /g /k
set _lock=0
:: Note about Lockbox method: It's working method is not very clean. We don't suggest to run it on a production system.
:: If value is changed in ABOVE lines or any ABOVE parameter is used then script will run in unattended mode
:: Incase if more than one options are used then only one option will be applied
:: To disable changing edition if current edition doesn't support HWID activation, change the value to 0 from 1 or run the script with /c parameter
set _chan=1
::========================================================================================================================================
:: Re-launch the script with x64 process if it was initiated by x86 process on x64 bit Windows
:: or with ARM64 process if it was initiated by x86/ARM32 process on ARM64 Windows
set "_cmdf=%~f0"
for %%# in (%*) do (
if /i "%%#"=="r1" set r1=1
if /i "%%#"=="r2" set r2=1
)
if exist %SystemRoot%\Sysnative\cmd.exe if not defined r1 (
setlocal EnableDelayedExpansion
start %SystemRoot%\Sysnative\cmd.exe /c ""!_cmdf!" %* r1"
exit /b
)
:: Re-launch the script with ARM32 process if it was initiated by x64 process on ARM64 Windows
if exist %SystemRoot%\SysArm32\cmd.exe if %PROCESSOR_ARCHITECTURE%==AMD64 if not defined r2 (
setlocal EnableDelayedExpansion
start %SystemRoot%\SysArm32\cmd.exe /c ""!_cmdf!" %* r2"
exit /b
)
:: Set Path variable, it helps if it is misconfigured in the system
set "PATH=%SystemRoot%\System32;%SystemRoot%\System32\wbem;%SystemRoot%\System32\WindowsPowerShell\v1.0\"
if exist "%SystemRoot%\Sysnative\reg.exe" (
set "PATH=%SystemRoot%\Sysnative;%SystemRoot%\Sysnative\wbem;%SystemRoot%\Sysnative\WindowsPowerShell\v1.0\;%PATH%"
)
:: Check LF line ending
pushd "%~dp0"
>nul findstr /rxc:".*" "%~nx0"
if not %errorlevel%==0 (
echo:
echo Error: This is not a correct file. It has LF line ending issue.
echo:
echo Press any key to exit...
pause >nul
popd
exit /b
)
popd
::========================================================================================================================================
cls
color 07
title HWID Activation
set _args=
set _elev=
set _unattended=0
set _args=%*
if defined _args set _args=%_args:"=%
if defined _args (
for %%A in (%_args%) do (
if /i "%%A"=="/a" set _acti=1
if /i "%%A"=="/g" set _gent=1
if /i "%%A"=="/k" set _lock=1
if /i "%%A"=="/c" set _chan=0
if /i "%%A"=="-el" set _elev=1
)
)
for %%A in (%_acti% %_gent% %_lock%) do (if "%%A"=="1" set _unattended=1)
::========================================================================================================================================
set winbuild=1
set "nul=>nul 2>&1"
set psc=powershell.exe
for /f "tokens=6 delims=[]. " %%G in ('ver') do set winbuild=%%G
set _NCS=1
if %winbuild% LSS 10586 set _NCS=0
if %winbuild% GEQ 10586 reg query "HKCU\Console" /v ForceV2 2>nul | find /i "0x0" 1>nul && (set _NCS=0)
if %_NCS% EQU 1 (
for /F %%a in ('echo prompt $E ^| cmd') do set "esc=%%a"
set "Red="41;97m""
set "Gray="100;97m""
set "Green="42;97m""
set "Magenta="45;97m""
set "_White="40;37m""
set "_Green="40;92m""
set "_Yellow="40;93m""
) else (
set "Red="Red" "white""
set "Gray="Darkgray" "white""
set "Green="DarkGreen" "white""
set "Magenta="Darkmagenta" "white""
set "_White="Black" "Gray""
set "_Green="Black" "Green""
set "_Yellow="Black" "Yellow""
)
set "nceline=echo: &echo ==== ERROR ==== &echo:"
set "eline=echo: &call :dk_color %Red% "==== ERROR ====" &echo:"
if %~z0 GEQ 500000 (set "_exitmsg=Go back") else (set "_exitmsg=Exit")
::========================================================================================================================================
if %winbuild% LSS 10240 (
%eline%
echo Unsupported OS version detected.
echo Project is supported for Windows 10/11.
goto dk_done
)
for %%# in (powershell.exe) do @if "%%~$PATH:#"=="" (
%nceline%
echo Unable to find powershell.exe in the system.
goto dk_done
)
::========================================================================================================================================
:: Fix for the special characters limitation in path name
set "_work=%~dp0"
if "%_work:~-1%"=="\" set "_work=%_work:~0,-1%"
set "_batf=%~f0"
set "_batp=%_batf:'=''%"
set _PSarg="""%~f0""" -el %_args%
set "_ttemp=%temp%"
setlocal EnableDelayedExpansion
::========================================================================================================================================
echo "!_batf!" | find /i "!_ttemp!" 1>nul && (
if /i not "!_work!"=="!_ttemp!" (
%eline%
echo Script is launched from the temp folder,
echo Most likely you are running the script directly from the archive file.
echo:
echo Extract the archive file and launch the script from the extracted folder.
goto dk_done
)
)
::========================================================================================================================================
:: Elevate script as admin and pass arguments and preventing loop
%nul% reg query HKU\S-1-5-19 || (
if not defined _elev %nul% %psc% "start cmd.exe -arg '/c \"!_PSarg:'=''!\"' -verb runas" && exit /b
%eline%
echo This script require administrator privileges.
echo To do so, right click on this script and select 'Run as administrator'.
goto dk_done
)
::========================================================================================================================================
:dl_menu
:: Lockbox method is not shown in menu because it's working method is not very clean. We don't suggest to run it on a production system.
:: Will enable it back when we have a better method for it. Till then, if you want to use Lockbox, you can use parameters, check at the top.
REM if %_unattended%==0 (
REM cls
REM mode 76, 25
REM title HWID Activation
REM echo:
REM echo:
REM echo:
REM echo:
REM echo ____________________________________________________________
REM echo:
REM if !_lock!==0 (
REM echo [1] HWID Activation
REM ) else (
REM call :dk_color2 %_White% " [1] HWID Activation " %_Yellow% " [LockBox Method]"
REM )
REM echo ____________________________________________
REM echo:
REM if !_lock!==0 (
REM echo [G] Generate Ticket
REM ) else (
REM call :dk_color2 %_White% " [G] Generate Ticket " %_Yellow% " [LockBox Method]"
REM )
REM echo ____________________________________________
REM echo:
REM echo [C] Change Method
REM echo:
REM echo [0] %_exitmsg%
REM echo ____________________________________________________________
REM echo:
REM call :dk_color2 %_White% " " %_Green% "Enter a menu option in the Keyboard:"
REM choice /C:1GC0 /N
REM set _el=!errorlevel!
REM if !_el!==4 exit /b
REM if !_el!==3 (
REM if !_lock!==0 (
REM set _lock=1
REM ) else (
REM set _lock=0
REM )
REM cls
REM echo:
REM call :dk_color %_Green% " Downlevel Method:"
REM echo It creates downlevelGTkey ticket for activation with simplest process.
REM echo:
REM call :dk_color %_Yellow% " LockBox Method:"
REM echo It creates clientLockboxKey ticket which better mimics genuine activation,
REM echo But requires more steps such as,
REM echo - Cleaning ClipSVC licences
REM echo - Deleting a volatile and protected registry key by taking ownership
REM echo - System may need a restart for succesful activation
REM echo - Microsoft Account and Store Apps may need relogin-restart in the system
REM echo:
REM call :dk_color2 %_White% " " %Green% "Note:"
REM echo Microsoft accepts both types of tickets and that's unlikely to change.
REM call :dk_color2 %_White% " " %Green% "On a production system we suggest to use Downlevel [default] Method only."
REM echo:
REM call :dk_color %_Yellow% " Press any key to go back..."
REM pause >nul
REM goto :dl_menu
REM )
REM if !_el!==2 set _gent=1&goto :dl_menu2
REM if !_el!==1 goto :dl_menu2
REM goto :dl_menu
REM )
:dl_menu2
cls
mode 102, 34
if %_gent%==1 (set _title=title Generate HWID GenuineTicket.xml) else (set _title=title HWID Activation)
if %_lock%==0 (%_title%) else (%_title% [Lockbox Method])
::========================================================================================================================================
if %_gent%==1 if exist %Systemdrive%\GenuineTicket.xml (
set _gent=0
%eline%
echo File '%Systemdrive%\GenuineTicket.xml' already exist.
if %_unattended%==0 (
echo:
call :dk_color %_Yellow% "Press any key to go back..."
pause >nul
goto dl_menu
) else (
goto dk_done
)
)
::========================================================================================================================================
call :dk_initial
:: Check if system is permanently activated or not
cls
call :dk_product
call :dk_checkperm
if defined _perm if not %_gent%==1 (
echo ___________________________________________________________________________________________
echo:
call :dk_color2 %_White% " " %Green% "Checking: %winos% is Permanently Activated."
call :dk_color2 %_White% " " %Gray% "Activation is not required."
echo ___________________________________________________________________________________________
if %_unattended%==1 goto dk_done
echo:
choice /C:12 /N /M "> [1] Activate [2] %_exitmsg% : "
if errorlevel 2 exit /b
)
cls
::========================================================================================================================================
:: Check Evaluation version
set _eval=
set _evalserv=
if exist "%SystemRoot%\Servicing\Packages\Microsoft-Windows-*EvalEdition~*.mum" set _eval=1
if exist "%SystemRoot%\Servicing\Packages\Microsoft-Windows-Server*EvalEdition~*.mum" set _evalserv=1
if exist "%SystemRoot%\Servicing\Packages\Microsoft-Windows-Server*EvalCorEdition~*.mum" set _eval=1 & set _evalserv=1
if defined _eval (
reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v EditionID 2>nul | find /i "Eval" 1>nul && (
%eline%
echo [%winos% ^| %winbuild%]
if defined _evalserv (
echo Server Evaluation cannot be activated. Convert it to full Server OS.
echo:
echo Check 'Change Edition Option' in Extras section in MAS.
) else (
echo Evaluation Editions cannot be activated. Download ^& Install full version of Windows OS.
echo:
echo https://massgrave.dev/
)
goto dk_done
)
)
::========================================================================================================================================
:: Check SKU value / Check in multiple places to find Edition change corruption
set osSKU=
set regSKU=
set wmiSKU=
for /f "tokens=3 delims=." %%a in ('reg query "HKLM\SYSTEM\CurrentControlSet\Control\ProductOptions" /v OSProductPfn 2^>nul') do set "regSKU=%%a"
if %_wmic% EQU 1 for /f "tokens=2 delims==" %%a in ('"wmic Path Win32_OperatingSystem Get OperatingSystemSKU /format:LIST" 2^>nul') do if not errorlevel 1 set "wmiSKU=%%a"
if %_wmic% EQU 0 for /f "tokens=1" %%a in ('%psc% "([WMI]'Win32_OperatingSystem=@').OperatingSystemSKU" 2^>nul') do if not errorlevel 1 set "wmiSKU=%%a"
set osSKU=%wmiSKU%
if not defined osSKU set osSKU=%regSKU%
if not defined osSKU (
%eline%
echo SKU value was not detected properly. Aborting...
goto dk_done
)
::========================================================================================================================================
:: Check if HWID key (Retail,OEM,MAK) is already installed or not
set _hwidk=
call :dk_channel
for %%A in (Retail OEM:SLP OEM:NONSLP OEM:DM Volume:MAK) do (if /i "%%A"=="%_channel%" set _hwidk=1)
::========================================================================================================================================
:: Detect Key
set app=
set key=
set pkey=
set altkey=
set changekey=
set curedition=
set altedition=
set notworking=
if defined applist call :hwiddata attempt1
if not defined key call :hwiddata attempt2
if defined notworking call :hwidfallback
if defined altkey (set key=%altkey%&set changekey=1&set notworking=)
set pkey=
if not defined key call :dk_hwidkey %nul%
::========================================================================================================================================
if not defined key if not defined _hwidk (
%eline%
%psc% $ExecutionContext.SessionState.LanguageMode 2>nul | find /i "Full" 1>nul || (
echo PowerShell is not responding properly. Aborting...
goto dk_done
)
echo [%winos% ^| %winbuild% ^| SKU:%osSKU%]
echo Unable to find this product in the supported product list.
echo Make sure you are using updated version of the script.
echo:
if not "%regSKU%"=="%wmiSKU%" (
echo Difference Found In SKU Value- WMI:%wmiSKU% Reg:%regSKU%
echo Restart the system and try again.
goto dk_done
)
goto dk_done
)
::========================================================================================================================================
:: Check files
if not exist "!_work!\BIN\gatherosstate.exe" (
%eline%
echo 'gatherosstate.exe' file is missing in 'BIN' folder. Aborting...
goto dk_done
)
:: Verify gatherosstate.exe file
set _hash=
for /f "skip=1 tokens=* delims=" %%# in ('certutil -hashfile "!_work!\BIN\gatherosstate.exe" SHA1^|findstr /i /v CertUtil') do set "_hash=%%#"
set "_hash=%_hash: =%"
if /i not "%_hash%"=="FABB5A0FC1E6A372219711152291339AF36ED0B5" (
if /i not "%_hash%"=="3FCCB9C359EDB9527C9F5688683F8B3C5910E75D" (
%eline%
echo gatherosstate.exe SHA1 hash mismatch found.
echo:
echo Detected: %_hash%
goto dk_done
)
)
::========================================================================================================================================
set error=
set activ=
:: Check Internet connection
cls
echo:
for /f "skip=2 tokens=2*" %%a in ('reg query "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment" /v PROCESSOR_ARCHITECTURE') do set arch=%%b
echo Checking OS Info [%winos% ^| %winbuild% ^| %arch%]
set _intcon=
if not %_gent%==1 (
for /f "delims=[] tokens=2" %%# in ('ping -n 1 licensing.mp.microsoft.com') do if not [%%#]==[] set _intcon=1
if defined _intcon (
echo Checking Internet Connection [Connected]
) else (
set error=1
call :dk_color %Red% "Checking Internet Connection [Failed To Connect licensing.mp.microsoft.com]"
)
)
::========================================================================================================================================
set "_serv=ClipSVC wlidsvc sppsvc LicenseManager Winmgmt wuauserv"
:: Client License Service (ClipSVC)
:: Microsoft Account Sign-in Assistant
:: Software Protection
:: Windows License Manager Service
:: Windows Management Instrumentation
:: Windows Update
:: Check disabled services
set serv_ste=
for %%# in (%_serv%) do (
set serv_dis=
reg query HKLM\SYSTEM\CurrentControlSet\Services\%%# /v Start %nul% || set serv_dis=1
for /f "skip=2 tokens=2*" %%a in ('reg query HKLM\SYSTEM\CurrentControlSet\Services\%%# /v Start 2^>nul') do if /i %%b equ 0x4 set serv_dis=1
if defined serv_dis (if defined serv_ste (set "serv_ste=!serv_ste! %%#") else (set "serv_ste=%%#"))
)
:: Change disabled services startup type to default
set serv_csts=
set serv_cste=
if defined serv_ste (
for %%# in (%serv_ste%) do (
if /i %%#==ClipSVC sc config %%# start= demand %nul%
if /i %%#==wlidsvc sc config %%# start= demand %nul%
if /i %%#==sppsvc sc config %%# start= delayed-auto %nul%
if /i %%#==LicenseManager sc config %%# start= demand %nul%
if /i %%#==Winmgmt sc config %%# start= auto %nul%
if /i %%#==wuauserv sc config %%# start= demand %nul%
if !errorlevel!==0 (
if defined serv_csts (set "serv_csts=!serv_csts! %%#") else (set "serv_csts=%%#")
) else (
set error=1
if defined serv_cste (set "serv_cste=!serv_cste! %%#") else (set "serv_cste=%%#")
)
)
)
if defined serv_csts echo Enabling Disabled Services [Successful] [%serv_csts%]
if defined serv_cste call :dk_color %Red% "Enabling Disabled Services [Failed] [%serv_cste%]"
if not "%regSKU%"=="%wmiSKU%" (
set error=1
call :dk_color %Red% "Checking WMI/REG SKU [Difference Found - WMI:%wmiSKU% Reg:%regSKU%] [Restart System]"
)
::========================================================================================================================================
:: Install key
echo:
if defined changekey (
call :dk_color %Magenta% "[%altedition%] Edition product key will be used to enable HWID activation."
echo:
)
set _partial=
if not defined key (
if %_wmic% EQU 1 for /f "tokens=2 delims==" %%# in ('wmic path SoftwareLicensingProduct where "ApplicationID='55c92734-d682-4d71-983e-d6ec3f16059f' and PartialProductKey<>null" Get PartialProductKey /value 2^>nul') do set "_partial=%%#"
if %_wmic% EQU 0 for /f "tokens=2 delims==" %%# in ('%psc% "(([WMISEARCHER]'SELECT PartialProductKey FROM SoftwareLicensingProduct WHERE ApplicationID=''55c92734-d682-4d71-983e-d6ec3f16059f'' AND PartialProductKey IS NOT NULL').Get()).PartialProductKey | %% {echo ('PartialProductKey='+$_)}" 2^>nul') do set "_partial=%%#"
call echo Checking Installed Product Key [Partial Key - %%_partial%%] [%_channel%]
)
set _channel=
set error_code=
if defined key (
if %_wmic% EQU 1 wmic path SoftwareLicensingService where __CLASS='SoftwareLicensingService' call InstallProductKey ProductKey="%key%" %nul%
if %_wmic% EQU 0 %psc% "(([WMISEARCHER]'SELECT Version FROM SoftwareLicensingService').Get()).InstallProductKey('%key%')" %nul%
if not !errorlevel!==0 cscript //nologo %windir%\system32\slmgr.vbs /ipk %key% %nul%
set error_code=!errorlevel!
cmd /c exit /b !error_code!
if !error_code! NEQ 0 set "error_code=[0x!=ExitCode!]"
if !error_code! EQU 0 (
call :dk_refresh
call :dk_channel
call echo Installing Generic Product Key [%key%] [%%_channel%%] [Successful]
) else (
call :dk_color %Red% "Installing Generic Product Key [%key%] [Failed] !error_code!"
)
)
::========================================================================================================================================
:: Files are copied to temp to generate ticket to avoid possible issues in case the path contains special character or non English names
echo:
set "temp_=%SystemRoot%\Temp\_Temp"
if exist "%temp_%\.*" rmdir /s /q "%temp_%\" %nul%
md "%temp_%\" %nul%
pushd "!_work!\BIN\"
copy /y /b "gatherosstate.exe" "%temp_%\gatherosstate.exe" %nul%
popd
if not exist "%temp_%\gatherosstate.exe" (
call :dk_color %Red% "Copying Required Files to Temp [%temp_%] [Failed]"
goto :dl_final
) else (
echo Copying Required Files to Temp [%temp_%] [Successful]
)
::========================================================================================================================================
if /i "%_hash%"=="3FCCB9C359EDB9527C9F5688683F8B3C5910E75D" (
echo Checking gatherosstate.exe [Already Modified]
%nul% ren "%temp_%\gatherosstate.exe" "gatherosstatemodified.exe"
goto :dlskipmod
)
:: Modify gatherosstate.exe
pushd "%temp_%\"
%nul% %psc% "$f=[io.file]::ReadAllText('!_batp!') -split ':hex\:.*';iex ($f[1]);"
popd
if not exist "%temp_%\gatherosstatemodified.exe" (
call :dk_color %Red% "Creating Modified Gatherosstate [Failed] Aborting..."
goto :dl_final
)
set _hash=
for /f "skip=1 tokens=* delims=" %%# in ('certutil -hashfile "%temp_%\gatherosstatemodified.exe" SHA1^|findstr /i /v CertUtil') do set "_hash=%%#"
set "_hash=%_hash: =%"
if /i not "%_hash%"=="3FCCB9C359EDB9527C9F5688683F8B3C5910E75D" (
call :dk_color %Red% "Creating Modified Gatherosstate [Failed] [Hash Not Matched] Aborting..."
goto :dl_final
) else (
echo Creating Modified Gatherosstate [Successful]
)
:dlskipmod
::========================================================================================================================================
:: Clean ClipSVC Licences
:: This code runs only if Lockbox method to generate ticket is manually set by the user in this script.
if %_lock%==1 (
for %%# in (ClipSVC) do (
sc query %%# | find /i "STOPPED" %nul% || net stop %%# /y %nul%
sc query %%# | find /i "STOPPED" %nul% || sc stop %%# %nul%
)
rundll32 clipc.dll,ClipCleanUpState
if exist "%ProgramData%\Microsoft\Windows\ClipSVC\*.dat" del /f /q "%ProgramData%\Microsoft\Windows\ClipSVC\*.dat" %nul%
if exist "%ProgramData%\Microsoft\Windows\ClipSVC\tokens.dat" (
call :dk_color %Red% "Cleaning ClipSVC Licences [Failed]"
) else (
echo Cleaning ClipSVC Licences [Successful]
)
)
::========================================================================================================================================
:: Below registry key (Volatile & Protected) gets created after the ClipSVC License cleanup command, and gets automatically deleted after
:: system restart. It needs to be deleted to activate the system without restart.
:: This code runs only if Lockbox method to generate ticket is manually set by the user in this script.
set "RegKey=HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ClipSVC\Volatile\PersistedSystemState"
set "_ident=HKU\S-1-5-19\SOFTWARE\Microsoft\IdentityCRL"
if %_lock%==1 (
%nul% call :regown "%RegKey%"
reg delete "%RegKey%" /f %nul%
reg query "%RegKey%" %nul% && (
call :dk_color %Red% "Deleting a Volatile Registry [Failed]"
call :dk_color %Magenta% "Restart the system, that will delete this registry key automatically"
) || (
echo Deleting a Volatile Registry [Successful]
)
REM Clear HWID token related registry to fix activation incase if there is any corruption
reg delete "%_ident%" /f %nul%
reg query "%_ident%" %nul% && (
call :dk_color %Red% "Deleting a Registry [Failed] [%_ident%]"
) || (
echo Deleting a Registry [Successful] [%_ident%]
)
)
::========================================================================================================================================
:: Multiple attempts to generate the ticket because in some cases, one attempt is not enough.
echo:
set "_noxml=if not exist "%temp_%\GenuineTicket.xml""
set pfn=
for /f "skip=2 tokens=3*" %%a in ('reg query "HKLM\SYSTEM\CurrentControlSet\Control\ProductOptions" /v OSProductPfn 2^>nul') do set "pfn=%%a"
"%temp_%/gatherosstatemodified.exe" Pfn=%pfn%;DownlevelGenuineState=1
%_noxml% timeout /t 3 %nul%
%_noxml% net stop sppsvc /y %nul%
%_noxml% call "%temp_%/gatherosstatemodified.exe" Pfn=%pfn%;DownlevelGenuineState=1
%_noxml% timeout /t 3 %nul%
:: Refresh ClipSVC (required after cleanup) with below command, not related to generating tickets
if %_lock%==1 (
for %%# in (wlidsvc LicenseManager sppsvc) do (net stop %%# /y %nul% & net start %%# /y %nul%)
call :dk_refresh
)
%_noxml% (
call :dk_color %Red% "Generating GenuineTicket.xml [Failed] [%pfn%]"
goto :dl_final
)
if %_lock%==1 (
find /i "clientLockboxKey" "%temp_%\GenuineTicket.xml" >nul && (
echo Generating GenuineTicket.xml [Successful] [%pfn%]
) || (
call :dk_color %Red% "Generating GenuineTicket.xml [Failed] [%pfn%]"
call :dk_color %Red% "downlevelGTkey Ticket created. Aborting..."
goto :dl_final
)
) else (
echo Generating GenuineTicket.xml [Successful] [%pfn%]
)
::========================================================================================================================================
:: Copy GenuineTicket.xml to the root of C drive and exit if ticket generation option was used in script
if %_gent%==1 (
echo:
copy /y /b "%temp_%\GenuineTicket.xml" "%Systemdrive%\GenuineTicket.xml" %nul%
if not exist "%Systemdrive%\GenuineTicket.xml" (
call :dk_color %Red% "Copying GenuineTicket.xml to %Systemdrive%\ [Failed]"
) else (
call :dk_color %Green% "Copying GenuineTicket.xml to %Systemdrive%\ [Successful]"
)
goto :dl_final
)
::========================================================================================================================================
:: clipup -v -o -altto <path> & clipup -v -o both methods may fail if the username have spaces/special characters/non English names
:: Most correct way to apply a ticket is by restarting ClipSVC service but we can not check the log details in this way
:: To get the log details and also to correctly apply ticket, script will install tickets two times (service restart + clipup -v -o -altto <path>)
set "tdir=%ProgramData%\Microsoft\Windows\ClipSVC\GenuineTicket"
if exist "%tdir%\*.xml" del /f /q "%tdir%\*.xml" %nul%
if not exist "%tdir%\" md "%tdir%\" %nul%
copy /y /b "%temp_%\GenuineTicket.xml" "%tdir%\GenuineTicket.xml" %nul%
if not exist "%tdir%\GenuineTicket.xml" (
call :dk_color %Red% "Copying Ticket to ClipSVC Location [Failed]"
)
set "_xmlexist=if exist "%tdir%\GenuineTicket.xml""
%_xmlexist% (
net stop ClipSVC /y %nul%
net start ClipSVC /y %nul%
%_xmlexist% timeout /t 2 %nul%
%_xmlexist% timeout /t 2 %nul%
%_xmlexist% (
if exist "%tdir%\*.xml" del /f /q "%tdir%\*.xml" %nul%
call :dk_color %Red% "Installing GenuineTicket.xml [Failed With ClipSVC Service Restart Method]"
)
)
clipup -v -o -altto %temp_%\
::==========================================================================================================================================
call :dk_product
echo:
echo Activating...
echo:
call :dk_act
call :dk_checkperm
if defined _perm (
set activ=1
call :dk_color %Green% "%winos% is permanently activated."
goto :dl_final
)
:: Refresh some services and license status
if %_lock%==1 set _retry=1
if defined _intcon set _retry=1
if defined _retry (
for %%# in (wlidsvc LicenseManager sppsvc) do (net stop %%# /y %nul% & net start %%# /y %nul%)
call :dk_refresh
call :dk_act
)
call :dk_checkperm
set "_unsup=call :dk_color %Magenta% "At the time of writing this, HWID Activation was not supported for this product.""
if defined _perm (
set activ=1
call :dk_color %Green% "%winos% is permanently activated."
) else (
call :dk_color %Red% "Activation Failed %error_code%"
if defined key if defined pkey %_unsup%
if not defined key %_unsup%
if defined notworking %_unsup%
if not defined notworking if defined key if not defined pkey call :dk_color %Magenta% "Restart the system and try again / Check troubleshooting steps in MAS Extras option"
)
::========================================================================================================================================
:dl_final
echo:
if exist "%temp_%\.*" rmdir /s /q "%temp_%\" %nul%
if exist "%temp_%\" (
call :dk_color %Red% "Cleaning Temp Files [Failed]"
) else (
echo Cleaning Temp Files [Successful]
)
if %osSKU%==175 (
call :dk_color %Red% "ServerRdsh Editon does not officially support activation on non-azure platforms."
)
if not defined activ call :dk_checkerrors
if not defined activ if not defined error (
echo Basic Diagnostic Tests [Error Not Found]
)
goto :dk_done
::========================================================================================================================================
:: A lean and mean snippet to set registry ownership and permission recursively
:: Written by @AveYo aka @BAU
:: pastebin.com/XTPt0JSC
:: Modified by @abbodi1406 to make it work in ARM64 Windows 10 (builds older than 21277) where only x86 version of Powershell is installed.
:: This code runs only if Lockbox method is manually set by the user in this script.
:regown
pushd "!_work!"
setlocal DisableDelayedExpansion
set "0=%~nx0"&%psc% $A='%~1','%~2','%~3','%~4','%~5','%~6';iex(([io.file]::ReadAllText($env:0)-split':Own1\:.*')[1])&popd&setlocal EnableDelayedExpansion&exit/b:Own1:
$D1=[uri].module.gettype('System.Diagnostics.Process')."GetM`ethods"(42) |where {$_.Name -eq 'SetPrivilege'} #`:no-ev-warn
'SeSecurityPrivilege','SeTakeOwnershipPrivilege','SeBackupPrivilege','SeRestorePrivilege'|foreach {$D1.Invoke($null, @("$_",2))}
$path=$A[0]; $rk=$path-split'\\',2; switch -regex ($rk[0]){'[mM]'{$hv=2147483650};'[uU]'{$hv=2147483649};default{$hv=2147483648};}
$HK=[Microsoft.Win32.RegistryKey]::OpenBaseKey($hv, 256); $s=$A[1]; $sps=[Security.Principal.SecurityIdentifier]
$u=($A[2],'S-1-5-32-544')[!$A[2]];$o=($A[3],$u)[!$A[3]];$w=$u,$o |% {new-object $sps($_)}; $old=!$A[3];$own=!$old; $y=$s-eq'all'
$rar=new-object Security.AccessControl.RegistryAccessRule( $w[0], ($A[5],'FullControl')[!$A[5]], 1, 0, ($A[4],'Allow')[!$A[4]] )
$x=$s-eq'none';function Own1($k){$t=$HK.OpenSubKey($k,2,'TakeOwnership');if($t){0,4|%{try{$o=$t.GetAccessControl($_)}catch{$old=0}
};if($old){$own=1;$w[1]=$o.GetOwner($sps)};$o.SetOwner($w[0]);$t.SetAccessControl($o); $c=$HK.OpenSubKey($k,2,'ChangePermissions')
$p=$c.GetAccessControl(2);if($y){$p.SetAccessRuleProtection(1,1)};$p.ResetAccessRule($rar);if($x){$p.RemoveAccessRuleAll($rar)}
$c.SetAccessControl($p);if($own){$o.SetOwner($w[1]);$t.SetAccessControl($o)};if($s){$($subkeys=$HK.OpenSubKey($k).GetSubKeyNames()) 2>$null;
foreach($n in $subkeys){Own1 "$k\$n"}}}};Own1 $rk[1];if($env:VO){get-acl Registry::$path|fl} #:Own1: lean & mean snippet by AveYo
::========================================================================================================================================
:: Get Windows permanent activation status
:dk_checkperm
if %_wmic% EQU 1 wmic path SoftwareLicensingProduct where (LicenseStatus='1' and GracePeriodRemaining='0' and PartialProductKey is not NULL) get Name /value 2>nul | findstr /i "Windows" 1>nul && set _perm=1||set _perm=
if %_wmic% EQU 0 %psc% "(([WMISEARCHER]'SELECT Name FROM SoftwareLicensingProduct WHERE LicenseStatus=1 AND GracePeriodRemaining=0 AND PartialProductKey IS NOT NULL').Get()).Name | %% {echo ('Name='+$_)}" 2>nul | findstr /i "Windows" 1>nul && set _perm=1||set _perm=
exit /b
:: Refresh license status
:dk_refresh
if %_wmic% EQU 1 wmic path SoftwareLicensingService where __CLASS='SoftwareLicensingService' call RefreshLicenseStatus %nul%
if %_wmic% EQU 0 %psc% "$null=(([WMICLASS]'SoftwareLicensingService').GetInstances()).RefreshLicenseStatus()" %nul%
exit /b
:: Get Windows installed key channel
:dk_channel
if %_wmic% EQU 1 for /f "tokens=2 delims==" %%# in ('wmic path SoftwareLicensingProduct where "ApplicationID='55c92734-d682-4d71-983e-d6ec3f16059f' and PartialProductKey<>null" Get ProductKeyChannel /value 2^>nul') do set "_channel=%%#"
if %_wmic% EQU 0 for /f "tokens=2 delims==" %%# in ('%psc% "(([WMISEARCHER]'SELECT ProductKeyChannel FROM SoftwareLicensingProduct WHERE ApplicationID=''55c92734-d682-4d71-983e-d6ec3f16059f'' AND PartialProductKey IS NOT NULL').Get()).ProductKeyChannel | %% {echo ('ProductKeyChannel='+$_)}" 2^>nul') do set "_channel=%%#"
exit /b
:: Activation command
:dk_act
set error_code=
if %_wmic% EQU 1 wmic path SoftwareLicensingProduct where "ApplicationID='55c92734-d682-4d71-983e-d6ec3f16059f' and PartialProductKey<>null" call Activate %nul%
if %_wmic% EQU 0 %psc% "(([WMISEARCHER]'SELECT ID FROM SoftwareLicensingProduct WHERE ApplicationID=''55c92734-d682-4d71-983e-d6ec3f16059f'' AND PartialProductKey IS NOT NULL').Get()).Activate()" %nul%
if not %errorlevel%==0 cscript //nologo %windir%\system32\slmgr.vbs /ato %nul%
set error_code=%errorlevel%
cmd /c exit /b %error_code%
if %error_code% NEQ 0 (set "error_code=[Error Code: 0x%=ExitCode%]") else (set error_code=)
exit /b
:: Get Windows Activation IDs
:dk_actids
set applist=
if %_wmic% EQU 1 set "chkapp=for /f "tokens=2 delims==" %%a in ('"wmic path SoftwareLicensingProduct where (ApplicationID='55c92734-d682-4d71-983e-d6ec3f16059f') get ID /VALUE" 2^>nul')"
if %_wmic% EQU 0 set "chkapp=for /f "tokens=2 delims==" %%a in ('%psc% "(([WMISEARCHER]'SELECT ID FROM SoftwareLicensingProduct WHERE ApplicationID=''55c92734-d682-4d71-983e-d6ec3f16059f''').Get()).ID ^| %% {echo ('ID='+$_)}" 2^>nul')"
%chkapp% do (if defined applist (call set "applist=!applist! %%a") else (call set "applist=%%a"))
exit /b
:: Get Product name (WMI/REG methods are not reliable in all conditions, hence winbrand.dll method is used)
:dk_product
set winos=
set d1=[DllImport(\"winbrand\",CharSet=CharSet.Unicode)]public static extern string BrandingFormatString(string s);
set d2=$AP=Add-Type -Member '%d1%' -Name D1 -PassThru; $AP::BrandingFormatString('%%WINDOWS_LONG%%')
for /f "delims=" %%s in ('"%psc% %d2%"') do if not errorlevel 1 (set winos=%%s)
echo "%winos%" | find /i "Windows" 1>nul || (
for /f "skip=2 tokens=2*" %%a in ('reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v ProductName 2^>nul') do set "winos=%%b"
if %winbuild% GEQ 22000 (
set winos=!winos:Windows 10=Windows 11!
)
)
exit /b
:: Check wmic.exe
:dk_ckeckwmic
set _wmic=0
for %%# in (wmic.exe) do @if not "%%~$PATH:#"=="" (
wmic path Win32_ComputerSystem get CreationClassName /value 2>nul | find /i "computersystem" 1>nul && set _wmic=1
)
exit /b
:dk_initial
echo:
echo Initializing...
:: Check and enable WinMgmt, sppsvc services if required
for %%# in (WinMgmt sppsvc) do (
for /f "skip=2 tokens=2*" %%a in ('reg query HKLM\SYSTEM\CurrentControlSet\Services\%%# /v Start 2^>nul') do if /i %%b NEQ 0x2 (
echo:
echo Enabling %%# service...
if /i %%#==sppsvc sc config %%# start= delayed-auto %nul% || echo Failed
if /i %%#==WinMgmt sc config %%# start= auto %nul% || echo Failed
)
sc start %%# %nul%
if !errorlevel! NEQ 1056 if !errorlevel! NEQ 0 (
echo:
echo Starting %%# service...
sc start %%#
echo:
call :dk_color %Red% "Failed to start [%%#] service, rest of the process may take a long time..."
)
)
:: Check WMI and SPP Errors
call :dk_ckeckwmic
set e_wmi=
set e_wmispp=
call :dk_actids
if not defined applist (
net stop sppsvc /y %nul%
cscript //nologo %windir%\system32\slmgr.vbs /rilc %nul%
if !errorlevel! NEQ 0 cscript //nologo %windir%\system32\slmgr.vbs /rilc %nul%
call :dk_refresh
if %_wmic% EQU 1 wmic path Win32_ComputerSystem get CreationClassName /value 2>nul | find /i "computersystem" 1>nul
if %_wmic% EQU 0 %psc% "Get-CIMInstance -Class Win32_ComputerSystem | Select-Object -Property CreationClassName" 2>nul | find /i "computersystem" 1>nul
if !errorlevel! NEQ 0 set e_wmi=1
if defined e_wmi (set e_wmispp=WMI, SPP) else (set e_wmispp=SPP)
call :dk_actids
)
exit /b
::========================================================================================================================================
:: Get Product Key from pkeyhelper.dll for future new editions
:: It works on Windows 10 1803 (17134) and later builds. (Partially on 1803 & 1809, fully on 1903 and later)
:dk_pkey
set pkey=
set d1=[DllImport(\"pkeyhelper.dll\",CharSet=CharSet.Unicode)]public static extern int SkuGetProductKeyForEdition(int e, string c, out string k, out string p);
set d2=$AP=Add-Type -Member '%d1%' -Name D1 -PassThru; $k=''; $null=$AP::SkuGetProductKeyForEdition(%1, %2, [ref]$k, [ref]$null); $k
for /f %%a in ('%psc% "%d2%"') do if not errorlevel 1 (set pkey=%%a)
exit /b
:: Get channel name for the key which was extracted from pkeyhelper.dll
:dk_pkeychannel
set k=%1
set pkeychannel=
set p=%SystemRoot%\System32\spp\tokens\pkeyconfig\pkeyconfig.xrm-ms
set m=[System.Runtime.InteropServices.Marshal]
set d1=[DllImport(\"PidGenX.dll\",CharSet=CharSet.Unicode)]public static extern int PidGenX(string k,string p,string m,int u,IntPtr i,IntPtr d,IntPtr f);
set d2=$AP=Add-Type -Member '%d1%' -Name D1 -PassThru; $k='%k%'; $p='%p%'; $r=[byte[]]::new(0x04F8); $r[0]=0xF8; $r[1]=0x04; $f=%m%::AllocHGlobal(1272); %m%::Copy($r,0,$f,1272);
set d3=%d2% [void]$AP::PidGenX($k,$p,\"00000\",0,0,0,$f); %m%::Copy($f,$r,0,1272); %m%::FreeHGlobal($f); [System.Text.Encoding]::Unicode.GetString($r, 1016, 128).Replace('0','')
for /f %%a in ('%psc% "%d3%"') do if not errorlevel 1 (set pkeychannel=%%a)
exit /b
:dk_hwidkey
for %%# in (pkeyhelper.dll) do @if "%%~$PATH:#"=="" exit /b
for %%# in (Retail OEM:NONSLP OEM:DM Volume:MAK) do (
call :dk_pkey %osSKU% '%%#'
if defined pkey call :dk_pkeychannel !pkey!
if /i [!pkeychannel!]==[%%#] (
set key=!pkey!
exit /b
)
)
exit /b
::========================================================================================================================================
:dk_checkerrors
:: Check if the services are able to run or not
:: Workarounds are added to get correct status and error code because sc query doesn't output correct results in some conditions
set serv_e=
for %%# in (%_serv%) do (
set errorcode=
set checkerror=
sc query %%# | find /i ": 4 RUNNING" %nul% || net start %%# /y %nul%
sc start %%# %nul%
set errorcode=!errorlevel!
if !errorcode! NEQ 1056 if !errorcode! NEQ 0 set checkerror=1
sc query %%# | find /i ": 4 RUNNING" %nul% || set checkerror=1
if defined checkerror if defined serv_e (set "serv_e=!serv_e!, %%#-!errorcode!") else (set "serv_e=%%#-!errorcode!")
)
if defined serv_e (
set error=1
call :dk_color %Red% "Starting Services [Failed] [%serv_e%]"
)
:: Various error checks
set token=0
if exist %Systemdrive%\Windows\System32\spp\store\2.0\tokens.dat set token=1
if exist %Systemdrive%\Windows\System32\spp\store_test\2.0\tokens.dat set token=1
if %token%==0 (
set error=1
call :dk_color %Red% "Checking SPP tokens.dat [Not Found]"
)
DISM /English /Online /Get-CurrentEdition %nul%
set error_code=%errorlevel%
cmd /c exit /b %error_code%
if %error_code% NEQ 0 set "error_code=[0x%=ExitCode%]"
if %error_code% NEQ 0 (
set error=1
call :dk_color %Red% "Checking DISM [Not Responding] %error_code%"
)
%psc% $ExecutionContext.SessionState.LanguageMode 2>nul | find /i "Full" 1>nul || (
set error=1
call :dk_color %Red% "Checking Powershell [Not Responding]"
)
for %%# in (wmic.exe) do @if "%%~$PATH:#"=="" (
set error=1
call :dk_color %Gray% "Checking WMIC.exe [Not Found]"
)
reg query "HKU\S-1-5-20\Software\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform\PersistedTSReArmed" %nul% && (
set error=1
call :dk_color %Red% "Checking Rearm [System Restart Is Required]"
)
reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ClipSVC\Volatile\PersistedSystemState" %nul% && (
set error=1
call :dk_color %Red% "Checking ClipSVC [System Restart Is Required]"
)
for /f "skip=2 tokens=2*" %%a in ('reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform" /v "SkipRearm" 2^>nul') do if /i %%b NEQ 0x0 (
reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SoftwareProtectionPlatform" /v "SkipRearm" /t REG_DWORD /d "0" /f %nul%
call :dk_color %Red% "Checking SkipRearm [Default 0 Value Not Found, Changing To 0]"
net stop sppsvc /y %nul%
net start sppsvc /y %nul%
set error=1
)
set _wsh=1
reg query "HKCU\SOFTWARE\Microsoft\Windows Script Host\Settings" /v Enabled 2>nul | find /i "0x0" 1>nul && (set _wsh=0)
reg query "HKLM\SOFTWARE\Microsoft\Windows Script Host\Settings" /v Enabled 2>nul | find /i "0x0" 1>nul && (set _wsh=0)
if %_wsh% EQU 0 (
set error=1
call :dk_color %Gray% "Checking Windows Script Host [Disabled]"
)
cscript //nologo %windir%\system32\slmgr.vbs /dlv %nul%
set error_code=%errorlevel%
cmd /c exit /b %error_code%
if %error_code% NEQ 0 set "error_code=[0x%=ExitCode%]"
if %error_code% NEQ 0 (
set error=1
call :dk_color %Red% "Checking slmgr /dlv [Not Responding] %error_code%"
)
if not defined applist (
set error=1
call :dk_color %Red% "Checking WMI/SPP [Not Responding] [%e_wmispp%]"
)
set nil=
set _sppint=
if not %_gent%==1 if not defined error (
for %%# in (SppE%nil%xtComObj.exe,sppsvc.exe) do (
reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Ima%nil%ge File Execu%nil%tion Options\%%#" %nul% && set _sppint=1
)
)
if defined _sppint (
call :dk_color %Red% "Checking SPP Interference In IFEO [Found] [Uninstall KMS Activator If There Is Any]"
set error=1
)
exit /b
::========================================================================================================================================
:dk_color
if %_NCS% EQU 1 (
echo %esc%[%~1%~2%esc%[0m
) else (
%psc% write-host -back '%1' -fore '%2' '%3'
)
exit /b
:dk_color2
if %_NCS% EQU 1 (
echo %esc%[%~1%~2%esc%[%~3%~4%esc%[0m
) else (
%psc% write-host -back '%1' -fore '%2' '%3' -NoNewline; write-host -back '%4' -fore '%5' '%6'
)
exit /b
::========================================================================================================================================
:dk_done
echo:
if %_unattended%==1 timeout /t 2 & exit /b
call :dk_color %_Yellow% "Press any key to %_exitmsg%..."
pause >nul
exit /b
::========================================================================================================================================
:: 1st column = Activation ID
:: 2nd column = Generic Retail/OEM/MAK Key
:: 3rd column = SKU ID
:: 4th column = 1 = activation is not working (at the time of writing this), 0 = activation is working
:: 5th column = Key Type
:: 6th column = WMI Edition ID
:: 7th column = Version name incase same Edition ID is used in different OS versions with different key
:: Separator = _
:: Key preference is in the following order. Retail > OEM:NONSLP > OEM:DM > Volume:MAK
:hwiddata
for %%# in (
8b351c9c-f398-4515-9900-09df49427262_XGVPP-NMH47-7TTHJ-W3FW7-8HV2C___4_0_OEM:NONSLP_Enterprise
23505d51-32d6-41f0-8ca7-e78ad0f16e71_D6RD9-D4N8T-RT9QX-YW6YT-FCWWJ__11_1_____Retail_Starter
c83cef07-6b72-4bbc-a28f-a00386872839_3V6Q6-NQXCX-V8YXR-9QCYV-QPFCT__27_0_Volume:MAK_EnterpriseN
211b80cc-7f64-482c-89e9-4ba21ff827ad_3NFXW-2T27M-2BDW6-4GHRV-68XRX__47_1_____Retail_StarterN
4de7cb65-cdf1-4de9-8ae8-e3cce27b9f2c_VK7JG-NPHTM-C97JM-9MPGT-3V66T__48_0_____Retail_Professional
9fbaf5d6-4d83-4422-870d-fdda6e5858aa_2B87N-8KFHP-DKV6R-Y2C8J-PKCKT__49_0_____Retail_ProfessionalN
f742e4ff-909d-4fe9-aacb-3231d24a0c58_4CPRK-NM3K3-X6XXQ-RXX86-WXCHW__98_0_____Retail_CoreN
1d1bac85-7365-4fea-949a-96978ec91ae0_N2434-X9D7W-8PF6X-8DV9T-8TYMD__99_0_____Retail_CoreCountrySpecific
3ae2cc14-ab2d-41f4-972f-5e20142771dc_BT79Q-G7N6G-PGBYW-4YWX6-6F4BT_100_0_____Retail_CoreSingleLanguage
2b1f36bb-c1cd-4306-bf5c-a0367c2d97d8_YTMG3-N6DKC-DKB77-7M9GH-8HVX7_101_0_____Retail_Core
2a6137f3-75c0-4f26-8e3e-d83d802865a4_XKCNC-J26Q9-KFHD2-FKTHY-KD72Y_119_0_OEM:NONSLP_PPIPro
e558417a-5123-4f6f-91e7-385c1c7ca9d4_YNMGQ-8RYV3-4PGQ3-C8XTP-7CFBY_121_0_____Retail_Education
c5198a66-e435-4432-89cf-ec777c9d0352_84NGF-MHBT6-FXBX8-QWJK7-DRR8H_122_0_____Retail_EducationN
cce9d2de-98ee-4ce2-8113-222620c64a27_KCNVH-YKWX8-GJJB9-H9FDT-6F7W2_125_1_Volume:MAK_EnterpriseS_2021
d06934ee-5448-4fd1-964a-cd077618aa06_43TBQ-NH92J-XKTM7-KT3KK-P39PB_125_0_OEM:NONSLP_EnterpriseS_2019
706e0cfd-23f4-43bb-a9af-1a492b9f1302_NK96Y-D9CD8-W44CQ-R8YTK-DYJWX_125_0_OEM:NONSLP_EnterpriseS_2016
faa57748-75c8-40a2-b851-71ce92aa8b45_FWN7H-PF93Q-4GGP8-M8RF3-MDWWW_125_0_OEM:NONSLP_EnterpriseS_2015
2c060131-0e43-4e01-adc1-cf5ad1100da8_RQFNW-9TPM3-JQ73T-QV4VQ-DV9PT_126_1_Volume:MAK_EnterpriseSN_2021
e8f74caa-03fb-4839-8bcc-2e442b317e53_M33WV-NHY3C-R7FPM-BQGPT-239PG_126_1_Volume:MAK_EnterpriseSN_2019
3d1022d8-969f-4222-b54b-327f5a5af4c9_2DBW3-N2PJG-MVHW3-G7TDK-9HKR4_126_0_Volume:MAK_EnterpriseSN_2016
60c243e1-f90b-4a1b-ba89-387294948fb6_NTX6B-BRYC2-K6786-F6MVQ-M7V2X_126_0_Volume:MAK_EnterpriseSN_2015
a48938aa-62fa-4966-9d44-9f04da3f72f2_G3KNM-CHG6T-R36X3-9QDG6-8M8K9_138_1_____Retail_ProfessionalSingleLanguage
f7af7d09-40e4-419c-a49b-eae366689ebd_HNGCC-Y38KG-QVK8D-WMWRK-X86VK_139_1_____Retail_ProfessionalCountrySpecific
eb6d346f-1c60-4643-b960-40ec31596c45_DXG7C-N36C4-C4HTG-X4T3X-2YV77_161_0_____Retail_ProfessionalWorkstation
89e87510-ba92-45f6-8329-3afa905e3e83_WYPNQ-8C467-V2W6J-TX4WX-WT2RQ_162_0_____Retail_ProfessionalWorkstationN
62f0c100-9c53-4e02-b886-a3528ddfe7f6_8PTT6-RNW4C-6V7J2-C2D3X-MHBPB_164_0_____Retail_ProfessionalEducation
13a38698-4a49-4b9e-8e83-98fe51110953_GJTYN-HDMQY-FRR76-HVGC7-QPF8P_165_0_____Retail_ProfessionalEducationN
1ca0bfa8-d96b-4815-a732-7756f30c29e2_FV469-WGNG4-YQP66-2B2HY-KD8YX_171_1_OEM:NONSLP_EnterpriseG
8d6f6ffe-0c30-40ec-9db2-aad7b23bb6e3_FW7NV-4T673-HF4VX-9X4MM-B4H4T_172_1_OEM:NONSLP_EnterpriseGN
df96023b-dcd9-4be2-afa0-c6c871159ebe_NJCF7-PW8QT-3324D-688JX-2YV66_175_0_____Retail_ServerRdsh
d4ef7282-3d2c-4cf0-9976-8854e64a8d1e_V3WVW-N2PV2-CGWC3-34QGF-VMJ2C_178_0_____Retail_Cloud
af5c9381-9240-417d-8d35-eb40cd03e484_NH9J3-68WK7-6FB93-4K3DF-DJ4F6_179_0_____Retail_CloudN
c7051f63-3a76-4992-bce5-731ec0b1e825_2HN6V-HGTM8-6C97C-RK67V-JQPFD_183_1_____Retail_CloudE
8ab9bdd1-1f67-4997-82d9-8878520837d9_XQQYW-NFFMW-XJPBH-K8732-CKFFD_188_0_____OEM:DM_IoTEnterprise
ed655016-a9e8-4434-95d9-4345352c2552_QPM6N-7J2WJ-P88HH-P3YRH-YY74H_191_0_OEM:NONSLP_IoTEnterpriseS
d4bdc678-0a4b-4a32-a5b3-aaa24c3b0f24_K9VKN-3BGWV-Y624W-MCRMQ-BHDCD_202_0_____Retail_CloudEditionN
92fb8726-92a8-4ffc-94ce-f82e07444653_KY7PN-VR6RX-83W6Y-6DDYQ-T6R4W_203_0_____Retail_CloudEdition
) do (
for /f "tokens=1-8 delims=_" %%A in ("%%#") do if %osSKU%==%%C (
if %1==attempt1 if not defined key (
echo "!applist!" | find /i "%%A" 1>nul && (
set app=%%A
set key=%%B
if %%D==1 set notworking=1
)
)
if %1==attempt2 if not defined key (
set 7th=%%G
if not defined 7th (
set app=%%A
if %%D==1 set notworking=1
if %winbuild% GTR 19044 call :dk_hwidkey %nul%
if not defined key set key=%%B
) else (
echo "%winos%" | find /i "%%G" 1>nul && (
set app=%%A
if %%D==1 set notworking=1
if %winbuild% GTR 19044 call :dk_hwidkey %nul%
if not defined key set key=%%B
)
)
)
)
)
exit /b
::========================================================================================================================================
:: Below code is used to get alternate edition name and key if current edition doesn't support HWID activation
:: ProfessionalCountrySpecific won't be converted because it's not a good idea to change CountrySpecific editions
:: 1st column = Current Edition Activation ID
:: 2nd column = Alternate Edition Activation ID
:: 3rd column = Alternate Edition Key
:: 4th column = Current Edition Name
:: 5th column = Alternate Edition Name
:: Separator = _
:: Key preference is in the following order. Retail > OEM:NONSLP > OEM:DM > Volume:MAK
:hwidfallback
if %_chan%==0 exit /b
for %%# in (
cce9d2de-98ee-4ce2-8113-222620c64a27_ed655016-a9e8-4434-95d9-4345352c2552_QPM6N-7J2WJ-P88HH-P3YRH-YY74H_EnterpriseS-2021____________IoTEnterpriseS
a48938aa-62fa-4966-9d44-9f04da3f72f2_4de7cb65-cdf1-4de9-8ae8-e3cce27b9f2c_VK7JG-NPHTM-C97JM-9MPGT-3V66T_ProfessionalSingleLanguage__Professional
) do (
for /f "tokens=1-5 delims=_" %%A in ("%%#") do if "%app%"=="%%A" (
echo "!applist!" | find /i "%%B" 1>nul && (
set altkey=%%C
set curedition=%%D
set altedition=%%E
)
)
)
exit /b
::========================================================================================================================================
:: Script changes below values in official gatherosstate.exe so that it can generate usable ticket in Windows unlicensed state
:hex:[
$bytes = [System.IO.File]::ReadAllBytes("gatherosstate.exe")
$bytes[320] = 0x9c
$bytes[321] = 0xfb
$bytes[322] = 0x05
$bytes[13672] = 0x25
$bytes[13674] = 0x73
$bytes[13676] = 0x3b
$bytes[13678] = 0x00
$bytes[13680] = 0x00
$bytes[13682] = 0x00
$bytes[13684] = 0x00
$bytes[32748] = 0xe9
$bytes[32749] = 0x9e
$bytes[32750] = 0x00
$bytes[32751] = 0x00
$bytes[32752] = 0x00
$bytes[32894] = 0x8b
$bytes[32895] = 0x44
$bytes[32897] = 0x64
$bytes[32898] = 0x85
$bytes[32899] = 0xc0
$bytes[32900] = 0x0f
$bytes[32901] = 0x85
$bytes[32902] = 0x1c
$bytes[32903] = 0x02
$bytes[32904] = 0x00
$bytes[32906] = 0xe9
$bytes[32907] = 0x3c
$bytes[32908] = 0x01
$bytes[32909] = 0x00
$bytes[32910] = 0x00
$bytes[32911] = 0x85
$bytes[32912] = 0xdb
$bytes[32913] = 0x75
$bytes[32914] = 0xeb
$bytes[32915] = 0xe9
$bytes[32916] = 0x69
$bytes[32917] = 0xff
$bytes[32918] = 0xff
$bytes[32919] = 0xff
$bytes[33094] = 0xe9
$bytes[33095] = 0x80
$bytes[33096] = 0x00
$bytes[33097] = 0x00
$bytes[33098] = 0x00
$bytes[33449] = 0x64
$bytes[33576] = 0x8d
$bytes[33577] = 0x54
$bytes[33579] = 0x24
$bytes[33580] = 0xe9
$bytes[33581] = 0x55
$bytes[33582] = 0x01
$bytes[33583] = 0x00
$bytes[33584] = 0x00
$bytes[34189] = 0x59
$bytes[34190] = 0xeb
$bytes[34191] = 0x28
$bytes[34238] = 0xe9
$bytes[34239] = 0x4f
$bytes[34240] = 0x00
$bytes[34241] = 0x00
$bytes[34242] = 0x00
$bytes[34346] = 0x24
$bytes[34376] = 0xeb
$bytes[34377] = 0x63
[System.IO.File]::WriteAllBytes("gatherosstatemodified.exe", $bytes)
:hex:]
::========================================================================================================================================